This printer weighs approximately 23 kg Preventing Media Misfeeds Media matches the printer specifications. When the optional offset tray is installed, job separation and offset printing can be performed. Each media size has a specific image- able area, the maximum area on which the printer can print clearly and without distortion. If toner spills, immediately wipe it off with a soft, dry cloth. Installing the Lower Feeder Unit Note Since consumables are installed in the printer, be sure to keep the printer

Uploader: Akigar
Date Added: 9 July 2013
File Size: 26.60 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 51764
Price: Free* [*Free Regsitration Required]

Page Placing the toner cartridge on a flat surface, pull out the seal hor- izontally. It is used primarily in dot matrix line printers, but it is also used in a number of ink jet printers.

This document is updated on an as needed basis. Using Media Using Media Remove the toner cartridge and check for damage. Loading Banner paper in the Tray 1 1 Open the tray and place it on a flat surface.

Fan the media, and align its edges. Remove the tray that you are printing from and reinsert it completely into the printer. Enter text from picture: Labels Use envelopes that are Common office envelopes approved for laser printing with diagonal joints, sharp folds and edges, and ordinary gummed flaps Because the envelopes pass through heated rollers, the gummed area on the flaps may seal.


Downloads – bizhub 40P – KONICA MINOLTA Europe

Postcards Use label sheets that are Recommended for laser printers Letter or A4 size adhesive label stock DO NOT use label sheets that Have labels that easily peel off or have parts of the label already removed Have backing sheets that have peeled away or have exposed adhesive Labels may stick to the fuser, causing them to peel off and media misfeeds to occur.

None of the above, continue with my search. Page 23 Select the General tab. Push the trays completely into the printer. Do not fan transparencies before load- ing them. Recognizing Status Monitor Alerts When the Status Monitor detects a printing problem, the icon on the Windows task bar changes from green normal to yellow warningmagenta or red errordepending on the severity of the printer problem. Page Remove the panel.

Konica Minolta bizhub 40p User Manual

Any damage to the printer or quality problems An attempt is made to have an entry for each ASCII printer from a particular manufacturer, whether they are currently marketed by that manufacturer or not. Image quality of the area from to mm in length is not guaran- teed. Recheck the media path and make sure that you have removed all of the misfed media.

Choose the Uninstall Program as follows: Loading Banner paper in the Tray 1 Open the tray and place it on a flat surface. The printable area on all media sizes is a a up to 4.



Installing the CompactFlash card Note If a CompactFlash card bjzhub been used for a device other than this printer, the card is automatically formatted and all of its data is cleared when installed onto the printer controller board. Pull down the 2 levers at the bot- tom of the fuser unit. Custom size Tray 1 Simplex Width: Y The printer data stream is a host-based or Windows-only data stream. Loading Envelopes Loading Envelopes The following procedure is given taking Envelop 10 pvl an example.

Using envelopes with emulsion-based glue avoids this problem. Check that the trays are loaded with media, in place, and secure.

Don’t have an account? Never attach the wrist strap to any piece of equipment with an electrical current present.

Help Screens Help Screens The help screens appear when the key is pressed after an error nizhub, such as a media misfeed, so that the error can be corrected. Initialize the hard disk. Introduction This chapter provides information to aid you in resolving printer problems you may encounter, or at least guide you Table Of Contents Contents 1 Introduction