The Setup button runs the software auto-installing program as explained in next section. Inspect this motherboard whether there are any damages to components and connectors on the board. Plug the bracket cable onto the USB2 connector. Remove a slot cover from one of the expansion slots on the system chassis. The Application button brings up a software menu. Use this item to enable or disable the onboard Parallel port, and to assign a port address. You can install this motherboard in an ATX case.

Uploader: Mooguktilar
Date Added: 7 November 2004
File Size: 37.51 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 88808
Price: Free* [*Free Regsitration Required]

Never connect power to the system during installation; otherwise, it may damage the motherboard.

Click the Next button. The socket latches are levered upwards and latch on to the edges of the DIMM. If you enable this item, the system can automatically resume if there is an incoming call on the Modem. Installing Support Software 1.


Install any remaining DIMM modules. Locate the infrared port IR1 connector on the motherboard. These items indicate cooling fan speeds in RPM and the various system voltage measurements. If the password has been installed, Installed displays. If the Setup Utility configuration is incorrect, it may cause the system vha malfunction.


This item shows frequency of the CPU installed in your system. Push down the latches on both sides of the DIMM socket. You can install bundled software as follows: The system will automatically detect the type of installed CPU and make the appropriate adjustments to these items on this page.

Carefully hold this motherboard by its edges. Hardware vg and software items are subject to change without notification. If you have two devices on the cable, one must be Master and one must be Slave.

MG (VA) PCCHIPS PC-CHIPS Motherboard Mainboard Drivers Manuals BIOS

Push the locking lever down and hook it under the latch on the edge of socket. Further, the manufacturer reserves the 8m63g to revise this publication and to make changes from time to time in the content hereof without obligation of the manufacturer to notify any person k863g such revision or changes. I Static Electricity Precautions As soon as the solution is done, the updated USB drive will be released to our website: A software menu appears.

Install each software in accordance with the corresponding driver path. The support software will automatically install.

PCCHIPS M863G – 5.1A – motherboard – micro ATX – AMD Duron 2200+ – Socket A – SiS741GX

The board is a Micro ATX size motherboard. You can run the setup utility and manually change the configuration. Drives can be 3. If you enable this item, the system will also search for other boot devices if it fails to find an operating system from the first two locations.


PCCHIPS M863G – 5.1A – motherboard – micro ATX – AMD Athlon XP 2800+ – Socket A – SiS741GX

The first jack is for stereo Line-In signal. It is highly recommend that users enter this option to load optimal default values for accessing the best performance. Infrared Port The infrared port allows the wireless exchange of information between your computer and similarly equipped devices such as printers, laptops, Personal Digital Assistants PDAsand other computers.

Use this item to enable or disable a power management scheme. Locate the USB2 connector on the motherboard. You can use the sub menu to change the supervisor password. Use the items below this one to set the date and time of the wake-up alarm.